100 Hour Service
Service Description
Here at Cotton Country Marine, we specialize in servicing your needed 100 hour engine maintenance. We only use OEM factory replacement parts on your engine. We do not cut costs by using aftermarket parts. Below you will find the general tasks and service done for our 100 hour maintenance. If there are any other issues with your engine, they will be brought to your attention so we can plan together on a repair plan.
• Anode: Check and replace if needed
• Battery: Check connections, charge and water levels
• Cables: Check for operation
• Carburetors: Synchronize and adjust idle and mixture
• Cylinder Heads: Torque bolts as necessary
• Electrical System: Check for operation
• Engine Compression: Performed on older model two-strokes, unless otherwise requested
• Engine Fittings: Clean and lubricated
• Engine: Clean and spray with lube
• Fuel Filters: Replace
• Fuel Lines: Check for leakage, splitting or rotting
• Fuel/Water Separator: Replace
• Gauges: Check for proper operation
• Hours on Motor. Record on service ticket
• Ignition Timing: Check and set, if necessary
• Lower Unit: Inspect and change lubricant
• Oil: Change oil and replace filter
• Propeller: Remove, clean and lube shaft
• Service Indicator/Alarm and reset
• Spark Plugs: Replace
• Thermostat: Check for operation. Additional Charge. Change every 200 hrs or two years
• Water Pump: Replace Impeller. Additional Charge. Changed every 200 hrs or two years
• Wet Test: All motors are wet-tested (water-tested)
• Boat: Wash-down after service